Studio-quality Speakers Designed by Phil Jones
Color:
The aesthetic AirPulse’s A200 is designed by Phil Jones. The cabinets are made from 25mm MDF. 36mm professional-grade sound absorption material is applied to reduce unwanted coloration in sound.
The horn-loaded ribbon tweeter features phase correction to improve upon frequency response. The ribbon tweeter has a low resistance of 0.2 ohms, ensuring a wide range of frequency responses.
The A200 active bookshelf speakers have a 5.5-inch aluminum alloy cone mid-range woofer unit.
Signal-to-Noise Rate:
≥ 90dB(A)
Total_Output_Power_RMS:
L/R(Treble)10W + 10W
L/R(Min-Range and Woofer) : 55W + 55W
Frequency_Response_No_Group:
46Hz - 20kHz
Audio_Inputs:
AUX, Balance Input, Optical, Coaxial, Bluetooth
lnput_Sensitivity:
AUX: 550 ± 50mV
Balance: 1300 ± 50mV
Optical: 350 ± 50mFFs
Coaxial: 350 ± 50mFFs
Bluetooth: 1000 ± 50mFFs
Bluetooth_Version_No_Group:
V5.0
Dimensions_W_x_H_x_D:
225mm x 355mm x 295mm
Net_Weight:
19kg
Please check the following points: 1) The power indicator light should be ON 2) Try to turn up the volume 3) Make sure the audio cables are correctly connected 4) Make sure you set the input correctly on the speakers 5) The audio source should deliver a signal output
Please check the below points: 1) Make sure your speaker is switched to Bluetooth mode. Disconnect any other devices from your speakers 2) Ensure the transmission range is within 10 meters. 3) Try another Bluetooth device for connection
You can turn on the speakers by one of the following methods: 1) Connect the main power of your speakers 2) Switch on the wall outlet of your speakers
